In the not-so-distant past, the solution for speed-boosting an aging and sluggish PC was to add more RAM or upgrade the processor. Now, the way to sail over that speed bump involves getting a new storage drive, and there’s no better storage upgrade when it comes to performance than fitting your system with an M.2 drive.

Also: This portable laptop accessory solved my biggest problem with working from home

There is no shortage of excellent M.2 drives out there, but if you’re looking for high-end performance and stability when the going gets tough, the CS3150 by PNY is well worth a look.  

What makes this drive special? Not only does it have a heatsink, but that heatsink is kitted out with two fans to dissipate the heat generated during use.

How do you know if your system can take an M.2 drive? Check the manual for your system or the motherboard it uses, do an online search, or open it up and check for an M.2 drive slot. 

One of the biggest killers of storage drives is heat. While this isn’t a problem for most systems, high-end gaming and content creation systems — when pushed to their limits — might hit a point where thermal throttling occurs (that is, a deliberate slowing down of the system to allow it to cool down) or — or the heat might cause crashes or premature damage to the drive.

Also: Can a Linux laptop replace my MacBook? Only if it looks like this and has these specs

The faster the drive, the more waste heat it generates.

And the CS3150 is a fast drive. Clocking sequential read and write speeds of 11,500 and 8,500 MB/s, respectively, it’s not as fast — or as expensive — as the Crucial T705, but that drive doesn’t have an actively cooled heatsink.

Testing the speed of the CS3150, I got speeds that were within five percent of the specs given by PNY, which is more than acceptable.

If you want to get the best out of this drive, note that you’ll need at minimum an Intel Core 13th or 14th-gen or AMD Ryzen 7000 CPU on a compatible motherboard with a free Gen5 M.2 slot.

Also: The cheap keychain tool I never leave home without – and why I love it

As for heat, I stress-tested the drive using CrystalDiskMark and monitored the temperatures using CrystalDiskInfo, and — despite my relentless thrashing of the CS3150 — I could not get the temperatures to exceed the 70°C/158°F maximum operating temperatures. It would seem that the active cooling is doing its job.

It’s worth bearing in mind that heatsinks and fans move the heat from the drive to the outside air; therefore — to maintain the drive’s efficiency — you also need to make sure that the PC has adequate airflow through the system. Also, the built-in fans on this device require a free set of 4-pin fan header pins on the motherboard to work.

This is quite a bulky drive. Although it should fit most M.2 drive slots on PC motherboards, it won’t fit into external drive enclosures unless you grab a screwdriver and remove the heatsink. This isn’t typically recommended, but if you plan on doing it, be careful separating the aluminum heatsink from the drive’s circuit board, as you don’t want to be ripping chips off the board.

Need to add a bit of color to your system? There’s also a version of this drive with RGB lights built into the heatsink. 

ZDNET’s buying advice

I can’t fault this drive. It’s a solid, fast, well-made drive that takes cooling to the next level with active cooling for those times when the drive is being pushed hard. 

While the PNY CS3051 isn’t the fastest drive around, the read and write speeds are good enough to keep all but the most performance-hungry users happy.

PNY CS3150 M.2 key specs

• Capacity: 1TB
• Form Factor: M.2 2280
• Interface: PCIe Gen5 x4
• Max Sequential Read Speed: 11,500 MB/s
• Max Sequential Write Speed: 8,500 MB/s
• Cooling: Dual-fan plus heatsink
• Mean Time Between Failures (MTBF): 1,600,000 Hours
• Warranty: 5-year limited warranty